Is yourLG dryershowing the D95error codeand messing up your laundry plans? That can be really annoying, right?
Well,you are experiencing that problem because yourdryer’s ventis having a hard time breathing– there’s a 95%airflowrestriction. This can make your dryer less effective and efficient.
The D95 code usually means that your vent is full of lint, but it could also be something else like small loads,thermal fuse, or bad thermostats.
In this guide, you’ll learn aboutsome of the most common causes of theLG dryerD95 code, 10 easy ways tofixit, and how to prevent it from happening again.
In a Hurry?
The main cause of the LG Dryer D95 Code is a severe airflow restriction in the dryer, which can affect its performance and efficiency. This usually happens when the vent is full of lint, but it could also be caused by other factors like small loads or faulty thermostats.
Causes ofLG DryerD95 Code
Table of Contents
The D95error codeonLG dryersindicates a severe 95%airflowrestriction, signaling an urgent venting issue that requires prompt attention. Here are the most likely causes that can trigger this concerning D95LG dryercode:
Excessive Lint Buildup
An accumulation of lint in the exhaust duct,lint filter, or external vent hoodis one of the most common triggers of the D95 code.
Substantiallint buildupover repeateddryingcycles chokesairflowby 95% or more, prompting the dryer sensors to display the D95 error.
Badly Crushed or Damaged Exhaust Duct
If theflexible exhaust duct, also known as theair exhaust hose, connected to the dryer’s rear vent is extremely crushed, kinked, or damaged, it can drastically chokeairflowby 95% or more. This severe duct deformation limits ventilation and triggers the D95 code.
Excessively Long, Coiled or Twisted Exhaust Duct
An extraordinarily long, winding, or twisted exhaust duct with too many tight bends and turns can also trigger the D95 codeby tremendously restrictingairflow. The convoluted ductwork enables rapidlint buildup.
Fully Blocked Wall or External Vent
A wall vent or external vent hood,including theoutside vent, totally clogged by debris causes the dryer sensors to detect a 95% or greaterairflowrestriction, resulting in a D95error code. Lint or other objects can completely block these vents over time, including thewall duct.
Very Small Load Size
Extra small loads don’t provide enoughairflowresistance for the sensors to read accurately.The sensors interpret this minimal resistance as a 95% restriction, displaying a false D95 code.
Fully Clogged Lint Filter
If thelint filteris completely clogged with accumulated lint, it will chokeairflowby 95% or more past the filter. This extremeblockageprompts the dryer sensors to display the D95error code.
Faulty Thermostats
Defective thermostats providing extremely inaccurate readings ofairflowrestrictions will manifest as a D95error codeon thedisplay panel, even with no actualblockagepresent. Malfunctioning thermostats give false D95 codes.
Related Article:Understanding D95 Error Code
Bad Thermal Fuse
The D95 code can also be triggered by abad thermal fuse, which disrupts the normal functioning of the dryer’s heating system and results in severeairflowrestriction.
How toFixLG DryerD95 Code
If yourLG dryerdisplays the concerning D95error code,here are thetroubleshootingsteps you can take to resolve the problem:
1. Thoroughly Clean theLint Filter
Carefullyremove thelint filterand scrub off any debrisusing a soft brush.
For heavily clogged filters, wash with warm water and detergent. Rinse and allow to completely air dry before reinserting. This will improveairflowboth inside andoutsidethe dryer.
Restart the dryerto see if the D95 code clears after a fullcycle.
2. Inspect the Exhaust Duct
Disconnect the exhaust duct andcheck for severe lint accumulation orblockageswithin theexhaust system, which can causeair blockage.
Use avacuum cleaneror a vacuum crevice tool to remove built-up lint. Straighten out any crushed sections of the duct.
Reconnect the duct securely before restarting the dryer. This will ensure properairflowwithin theventilation system.
3. Check Exterior and Wall Vents
Detach and thoroughly inspect all exterior and wall vents, including the ventoutside of your home, for obstructionsblocking 95% or more of the ductwork.
Use a vacuum and brush to clear any substantial lint or debris found. Reassemble properly before use.
4. Replace Faulty Thermostats
If the cycling or high-limit thermostats are defective,disconnect the wires, remove screws, and replace the damaged thermostats. Securely reconnect wires and remount any new replacement thermostats properly before use.
5. Replace Faulty Thermostats
If the D95error codepersists, it may be due to a faultythermal fuse. In this case, it is recommended toreplace thebad thermal fuseto restore properairflowand resolve the error.”
6. Verify Electrical Connections
Ensure thedryer is plugged firmly into a dedicated 220-240V outlet. Inspect for damaged wiring and hire an electrician if needed to replace faulty outlets or wires.
Also,reset any tripped breakers. Reliable power prevents falseLG DryerD95 noblockageerrors.
7. IncreaseLoad Size
For extra small loads,add items to increase to 3/4 full drum capacity. This provides enoughairflowresistance for accurate readings. Avoid overloading the dryer.
8. Adjust or Replace Heating Element
If theheating elementis loose or burnt out,unplug the dryer and remove the rear panel.
Inspect the element and adjust or replace itwith a manufacturer-approved part if faulty.
Related Article:LG Dryer Not Heating
9. Lower Flow Sense Sensitivity
If the dryer seems overly sensitive, refer to the owner’s manual on how toenter diagnostic mode and decrease the sensitivityto avoid erroneous D95 codes.
10. Professional Diagnosis and Repair
For persisting D95 codes,contact LG support to arrange a professional diagnosis. A technician can identify and replace any malfunctioning control boards or components triggering the error.
PreventingLG DryerD95 Code
You can prevent the concerning D95error codefrom appearing againby implementing these proactive maintenance measures:
Clean the lint filter after each cycle
Get into the habit of removing and cleaning thelint filterafter each dryingcycle. Use a brush to dislodge any clinging lint. Frequentlint filtermaintenance is essential to avoidclogging.
Monthly professional duct cleaning
Hire an HVAC technician monthly to thoroughly clean the entire dryer ducting and external vent hood. Their specialized tools can clear even hard-to-reach lint. Professional cleaning prevents excessive buildup.
Inspect ducting closely for damage
Carefully inspect the flexible exhaust duct often for any crushing, kinking, or wear.Straighten out any crushed sections immediately and replace damaged ducts. Deformed ducts severely chokeairflow.
Use smooth rigid metal ducting
When installing a new dryer,use smooth rigid metal ductwork rather than foil or ribbed flexible ducts. Rigid metal ducts minimize lint accumulation and ensure smootherairflowthrough thedryer exhausts.
Optimize ductwork design
Configure the exhaust duct to be as short and straight as possible during installation. Limit the number ofelbowsand follow the manufacturer’s recommended duct length limits.
Check the exterior vent hood regularly
Frequently check the exterior vent hood, including the vent on theside of your home, to ensure it’s not clogged with lint or other debris. Remove any obstructions to maintainenough aircirculation. This will help prevent the D95error codefrom appearing.
Level the dryer appropriately
Check dryer leveling periodically and adjust feet as needed to maintain proper balance. This preventsairflowissues from uneven installation.
Handle ducts and dryer gently
Avoid kinking ducts when moving the dryer, and handle components gently to prevent damage. Duct damage can significantly restrictairflow.
Final Thoughts
You’ve just learnedhow tofixtheLG dryerD95error code, which means your dryer has a bigairflowproblem.
This problem can make your dryer less effective and efficient, and it usually happens because there’s a lot of lint in your vent, but it could also be something else like small loads or bad thermostats.
Tofixthis problem,you just need to follow some easy steps and use some simple tools.
You need to clean thelint filter, the exhaust duct, and the vents often. You also need to check and replace any broken parts like thermostats, heating elements, or control boards if needed.
If you’ve tried everything in this guide and the problem is still there,you should call LG support or a professional technician for more help. They will be able to find out andfixany bad components or control boards that may be causing the error.
Related Article:LG Dryer D80 Code
Related Article:LG Dryer D90 Code
Rate this post
Adrian Simmons( Licensed Appliance Repair Expert )
Adrian is an ISCET licensed professional that has completed the National Appliance Service Technician Certification Exam and has the expertise to diagnose and repair any appliance. He is well-versed in the latest technologies and techniques and is always up-to-date on the latest industry standards.
